Epson Printer Error 0x10 is a common issue that typically indicates a scanner malfunction. This error usually occurs when the printer’s scanner mechanism is jammed, obstructed, or has internal hardware issues. It can also be caused by a firmware glitch, a paper jam, or an issue with the printer's movement sensors. Fortunately, this problem can be fixed using some simple troubleshooting steps.

Common Causes of Epson Printer Error 0x10

Before jumping into solutions, it’s important to understand the possible causes of this error:

  1. Obstructed Scanner Mechanism – Dust, paper bits, or foreign objects blocking the scanner.
  2. Hardware Malfunction – A damaged scanner motor or sensor issue.
  3. Firmware Glitch – Temporary bugs that can be resolved with a reset.
  4. Paper Jam – A stuck piece of paper affecting the scanning function.
  5. Faulty Printer Drivers – Outdated or corrupt drivers causing errors.

Now, let’s go through the solutions to fix Error 0x10 on your Epson printer.

Solution 1: Restart Your Printer

Sometimes, a simple restart can fix minor glitches and reset the internal components of your printer.

Steps to Restart:

  1. Turn off your Epson printer and unplug it from the power source.
  2. Wait for 5-10 minutes to let the internal components reset.
  3. Plug the printer back in and turn it on.
  4. Check if the Error 0x10 is resolved.

If the error persists, move on to the next solution.

Solution 2: Check for Scanner Obstructions

An obstruction in the scanner mechanism can trigger this error. Follow these steps to check for any physical blockages.

Steps to Inspect Scanner:

  1. Turn off the printer and unplug it.
  2. Lift the scanner lid and inspect the scanner glass.
  3. Look for dust, debris, or stuck objects like paper clips or small bits of paper.
  4. Use a soft cloth to gently clean the scanner area.
  5. If needed, move the scanner bar manually (carefully) to check for obstructions.
  6. Close the lid and restart the printer to see if the error is resolved.

Solution 3: Perform a Hard Reset

A hard reset can clear temporary memory issues and restore normal function.

Steps to Hard Reset:

  1. Turn off the printer.
  2. Unplug it from the power source.
  3. Press and hold the Power button for 60 seconds.
  4. Release the button and plug the printer back in.
  5. Turn the printer back on and check if the error persists.

Solution 4: Check for Paper Jams

Sometimes, a paper jam can interfere with the scanner mechanism, causing Error 0x10.

Steps to Remove Paper Jams:

  1. Turn off and unplug the printer.
  2. Open the paper tray and check for any jammed paper.
  3. Remove any stuck paper gently to avoid damaging the printer.
  4. Open the scanner unit and inspect the internal parts for obstructions.
  5. Close everything and turn the printer back on.

Solution 5: Update or Reinstall Printer Drivers

Outdated or corrupted printer drivers can also cause Error 0x10.

Steps to Update Printer Drivers:

  1. Go to the Epson Support website.
  2. Enter your printer model and navigate to the Drivers & Downloads section.
  3. Download the latest printer and scanner drivers.
  4. Install the drivers and restart your computer and printer.

If updating the drivers doesn’t work, try uninstalling and reinstalling them.

Solution 6: Reset Your Printer to Factory Settings

If none of the previous methods work, a factory reset might be needed to clear any persistent issues.

Steps to Reset Your Epson Printer:

  1. Turn on the printer.
  2. Navigate to the Settings menu using the control panel.
  3. Look for Restore Default Settings or Reset Printer.
  4. Confirm the reset and wait for the printer to restart.

Solution 7: Contact Epson Support

If the Error 0x10 still appears after trying all the above methods, the issue might be hardware-related. In such cases, it’s best to contact Epson Customer Support for further assistance.

Steps to Contact Epson Support:

  1. Visit www.epson.com/support.
  2. Select your printer model and check for available solutions.
  3. If necessary, reach out to Epson customer service via phone or chat.

Conclusion

Epson Printer Error 0x10 is usually caused by a scanner malfunction, an obstruction, or firmware issues. By following the troubleshooting steps outlined above—restarting the printer, checking for scanner obstructions, clearing paper jams, updating drivers, and performing a reset—you can resolve the issue quickly. If none of these methods work, contact Epson Support for professional assistance. Hopefully, these steps will get your printer back up and running in minutes! 🚀