The Epson L3110 is a popular all-in-one printer known for its efficient ink tank system and affordability. However, like many Epson printers, it may display error messages after a certain number of pages are printed. The most common error is the “Service Required” or “Ink Pad Is at the End of Its Service Life” message, which prevents you from printing further.

This issue occurs because the printer’s internal counter has reached its limit, estimating that the waste ink pads are full. But in many cases, the pads still have life left. You can resolve this problem by using the Epson Adjustment Program (also known as the Resetter Tool) to reset the waste ink pad counter.

In this guide, we’ll explain step-by-step how to download, install, and use the Epson L3110 Adjustment Program to reset your printer and clear the error.

 

 

✅ Why Does the Epson L3110 Need Resetting?

Epson printers are programmed to count every cleaning and ink discharge cycle. Once it reaches a preset number (usually after thousands of prints), the printer stops working to prevent potential ink overflow. The message may appear as:

  • “Service required.”

  • “Ink pad is full.”

  • Blinking red light on the printer panel.

The printer is essentially locked until you reset this counter. The good news is you can do this yourself using a special software utility.

📝 Steps to Reset Epson L3110 Using Adjustment Program

🔹 1. Download the Epson L3110 Adjustment Program

You’ll first need to download the resetter tool for your printer model. It’s important to ensure you get it from a trusted source to avoid malware. Search for:

“Epson L3110 Adjustment Program download”

Look for a ZIP or RAR file. Once downloaded, extract the files to a folder on your desktop.

Note: Some antivirus software may flag the tool as suspicious because it modifies printer firmware, but it’s generally safe from reputable sites. Temporarily disable antivirus if necessary to complete the process.

🔹 2. Prepare Your Computer

✅ Connect the Epson L3110 printer via USB cable directly to your PC.

✅ Turn on the printer and ensure it is recognized by Windows.
✅ Close any other Epson-related applications running in the background.

 

It’s recommended to use Windows 7, 8, or 10 (32-bit or 64-bit). Windows 11 may work, but older versions are more compatible.

🔹 3. Run the Adjustment Program

Inside the extracted folder, look for a file named:

👉 AdjProg.exe or Epson Adjustment Program.exe

  • Right-click the file and choose “Run as Administrator”.

  • If you see a registration screen, click “Accept” or “OK” to continue.

A window will appear with multiple printer models. Select:

✅ Model Name: Epson L3110

✅ Destination: [Keep default or choose your region]

 

 


 

Click OK to proceed.

🔹 4. Select the Waste Ink Pad Counter Reset Option

In the main Adjustment Program window:

  1. Click “Particular Adjustment Mode.”

  2. Scroll down and select “Waste Ink Pad Counter” from the list.

  3. Click OK.

A new dialog box will open. Check the boxes:

✅ Main Pad Counter

✅ Platen Pad Counter (if available)

 

Then click “Check” to read the current values. This shows how much the counter has accumulated.

🔹 5. Reset the Waste Ink Pad Counter

Once checked, now click:

👉 “Initialize” or “Reset” button.

You will be prompted with a confirmation dialog — click OK or Yes to proceed.

The reset process will only take a few seconds. Once complete, a success message will appear.

Important: After resetting, turn off the printer and wait about 30 seconds before turning it back on. This step finalizes the reset.

✅ 6. Verify the Reset

When the printer powers back on:

  • The blinking red light should disappear.

  • The “Service required” message should no longer show.

  • You should be able to print normally again.

To double-check, you can rerun the Adjustment Program and click “Check” again under Waste Ink Pad Counter to confirm that the counter is now at 0% or close to zero.

⚠️ Precautions and Tips

  • The reset doesn’t physically empty the waste ink pads; it only resets the software counter. If you’ve reset the printer multiple times, you may eventually need to replace or clean the pads to avoid ink overflow inside the printer.

  • Place a piece of absorbent paper under the printer if you notice any ink leakage.

  • Perform periodic manual maintenance if you print large volumes.

🛠️ Alternative Solutions

If the Adjustment Program doesn’t work or gives an error:

✅ Try running it in compatibility mode (Right-click > Properties > Compatibility).

✅ Use another USB port or different USB cable.
✅ Use a different Windows PC, preferably older versions like Windows 7.

 

In rare cases, you may need to seek help from an authorized Epson service center if the reset software fails or if the waste pads are physically saturated.

 


 

🏁 Conclusion

Resetting the Epson L3110 printer using the Adjustment Program is a straightforward solution to resolve the “Service Required” or “Ink Pad Full” error. By following these steps carefully, you can extend your printer’s usability without costly repairs or replacements.

However, remember that resetting only addresses the software counter; it doesn’t replace the actual waste ink pads. If you reset too many times without servicing, ink overflow may damage internal components. It’s best to plan for pad replacement or cleaning after several resets.

With proper maintenance, your Epson L3110 can continue to deliver excellent printing performance for years to come.

Would you like this formatted for a blog post or with additional screenshots/visuals?